Lighting, blinds and home cinema designed as one system — specified, wired and programmed by Lutron-certified and approved electricians, for homes across Tonbridge & West Kent.
This is the design-led side of what we do — lighting, shading and sound planned together as one system, wired out of sight and finished to a standard you’ll want to show off.
We specify dedicated, professionally installed Lutron control — wired keypads, flicker-free dimming and quiet automated shading, not a drawer full of app gadgets. And because we’re electricians first, the power and cabling behind it all are designed, installed and certified by the same NAPIT-registered team.
Three specialisms, one system — each designed around your home and installed by the same team. Start with the room that matters most, or plan the whole house in one go.
One-touch scenes for the way you actually live — designed, installed and programmed by our own electricians, from an elegant keypad, your phone or your voice.
Lutron-powered blinds that rise with the morning, tame the glare and slip quietly into place at dusk — measured, fitted and programmed by one local team.
Dedicated cinema rooms, media walls and music in every room — designed, wired and set up by our own team, and run from one remote or app.
A smart home lives or dies on what’s behind the wall. Every system we install sits on power, containment and cabling designed by a NAPIT-registered electrical contractor — and the electricians who wire it are the same people who set it up, from the keypads and blinds to the cinema and media wall. No hand-offs between trades, and nothing bolted onto someone else’s wiring.
Cable routes, containment and power planned before the first keypad goes on the wall.
NAPIT approved (Reg. 62998), Part P registered and fully insured — with notifiable work certified.
RA3 scenes, schedules and changes come from the same people who wired it.
One number to call from survey to handover, one electrical certificate for the wiring and one 12-month labour warranty on our work.
The easiest time to prepare for a smart home is while the walls are open. If you’re extending or renovating, we plan the first fix so lighting control, blinds and AV can go in later without chasing finished plaster — even if the system itself is a year or two away.
A neutral at every switch position and the right backboxes where keypads will go, so smart dimmers and keypads fit without reworking the wall.
CAT6 to the rooms that need it, plus containment behind a future media wall or cinema screen, so cables can be pulled through when the time comes.
Power at the window heads for motorised blinds, and a consumer unit with room for the circuits a smart home adds.
Planning a full rewire or a consumer unit upgrade? It’s the natural moment to add smart-ready wiring, or to put Lutron lighting into a room or two while we’re already on site.
Free and no-obligation — we walk the rooms, talk through how you live and what each space should do.
A clear specification and a fixed quote — so you know exactly what’s included before any work starts.
First-fix cabling through to final fit, worked tidily around your home or your build programme.
Scenes set, blinds tuned and the app configured — with a proper walkthrough before we leave.
Which? Trusted Trader
NAPIT Reg. 62998
5 / 5 on Google
It depends entirely on scope — a single room of Lutron lighting is a very different project from whole-house lighting, blinds and a cinema. Rather than publish one-size-fits-all prices, we offer a free design consultation and a clear, fixed, no-obligation quote for your home.
App-controlled bulbs and plug-in gadgets are fine until the Wi-Fi drops or the app changes. Lutron is a dedicated, professionally installed control system — wired keypads, flicker-free dimming and scenes that simply work, day after day. We install RA3 ourselves, so your system is designed, installed and programmed by one team.
Usually, yes. Lutron RA3 is designed with retrofit in mind: its wireless dimmers and keypads can often go into your existing switch positions and backboxes, so many rooms need no new cable runs and no redecorating. Whether that works room by room depends on the existing wiring and backboxes, which we check at the survey. Where a keypad needs a new position or a backbox has to change, there may be some minor making-good, and we’ll tell you which rooms that applies to before we start. As electricians we’re used to working in finished, lived-in homes, routing cable discreetly and keeping disruption to a minimum, and you can start with one room and add more later.
Yes — that’s the point of designing them as one system. A lighting scene can bring the blinds down with it, one press can set a room for a film, and everything stays controllable from the same keypads, app or voice. We design the whole system together rather than bolting on gadgets one by one.
Electricians first. Allview is NAPIT approved (Reg. 62998), Part P registered and fully insured — so the power, cabling and containment behind your smart home are designed and certified by the same team that programmes it. Home cinemas and media walls are installed and set up by our own team too. No hand-offs between trades.
We’re based just outside Tonbridge and install across West Kent — Tunbridge Wells, Sevenoaks, West Malling, Kings Hill, Penshurst and the surrounding villages — as well as into East Sussex, including Crowborough, Wadhurst and Mayfield.
Yes. Allview is Lutron-certified, trained and approved, and we design and install both RA3 and HomeWorks lighting control, along with Lutron shading and keypads. RA3 works well one room at a time or across a whole house; HomeWorks is Lutron’s flagship system for larger whole-home projects. Either way, the same team that wires your home sets the system up.
Tell us about your home and what you’d like it to do — and we’ll come back with honest advice, a free design consultation and a clear fixed quote.