Solar panels
Panels from makers including Aiko, JA Solar and LONGi, laid out to suit your roof and what you want from the system.
PV/01 / Home / Solar Panel Installation
Solar Panel Installation
Solar Panel Installation
in Tonbridge & Kent.
Generate your own power from your roof — solar panels, inverters and batteries for homes, businesses and industrial sites, designed, installed and commissioned by trusted local electricians.
NAPIT Approved · Part P
5.0 Google rating
Family-run since 2018
01 / What we install
What we install
A complete system for homes, businesses, farms and industrial sites, from the panels on your roof to the connection into your electrics.
Flat and pitched roofs
We fit panels on flat and pitched roofs. On a flat roof, they can sit on ballast trays weighted with concrete blocks.
Inverters and wiring
We supply and fit inverters, mainly Fox and Sigenergy, and run the cabling that connects the panels to your electrics.
Battery storage
We supply and fit batteries, mainly Fox and Sigenergy, to store the power your panels generate.
EV charging
Charge your car using your solar power with a home EV charger, including Zappi.
Consumer unit upgrades
We survey your consumer unit as part of every quote, and upgrade it if your system needs it.
02 / Why Allview
Why choose
Why choose
Allview
We’re a family-run team of electricians, founded in 2018. A solar system is only as good as its electrical work, so our own team handles all of it.
NAPIT-registered and Part P
Qualified electricians, registered with NAPIT (Reg. No. 62998) and under Part P.
Our own electricians
Our own team does all the electrical work on your system.
No hand-off between trades
Panels, batteries, EV chargers and consumer units all come from one team.
Full service
We handle the design, commissioning, MCS certificate and network operator applications.
03 / Case study
Case Study: Rooftop solar in Tunbridge Wells
Rows of black solar panels on the flat roof of a home, from the crane lift to the finished array.
J/01 / Job sheet
- Location
- Tunbridge Wells
- Property
- Home
- Roof
- Flat roof
- Mounting
- Renusol ConSole+ ballast trays, 15° tilt
- System size
- 29.4 kWp
- Panels
- 58 Aiko: 35 at 485 W, 23 at 540 W
- Inverter
- Fox ESS H3 Pro 30 kW
- Monitoring
- FoxCloud
- Phasing
- Solar first, battery second
- Solar completed
- Autumn 2026
- Worked for
- Main contractor
- Certification
- NICEIC, MCS
The main contractor asked us to supply, install and commission a solar PV and battery system for a home in Tunbridge Wells. The job was phased, with the solar first and the battery second.
The main challenge was access to the flat roof, which needed a 40-ton crane to lift the equipment up.
We laid grey protective sheets over the roof, set out black plastic trays and weighted them with concrete blocks. We then fixed the black solar panels in rows across the roof.
“I think we can all agree it all went very smoothly…”
04 / How it works
How it works
Full design, commissioning, MCS and network operator applications, all handled for you.
01 / 04
Survey
We survey your roof and your consumer unit, and ask what you want from the system.
02 / 04
Design and quote
We design a system around your needs and the space you have, and give you a clear quote.
03 / 04
Applications and installation
We handle your network operator application (G98, G99 or G100), get the materials onto the roof, fix the panels and run the cabling.
04 / 04
Commissioning and handover
We commission and test the system, complete your MCS certificate, then show you how it works.
05 / Loved across West Kent
What our customers say
Which? Trusted Trader
NAPIT Reg. 62998
06 / Good to know
Frequently asked questions
We don’t do one-size-fits-all systems. Each one is designed around your needs and the space available, so we give you a clear quote after a survey.
Installing solar panels and batteries in a home is zero-rated for VAT until 31 March 2027. The reduced rate applies after that. This applies to homes, not to businesses in general.
In England, most domestic rooftop solar is permitted development, subject to limits. Listed buildings are excluded, and conservation areas have extra limits. If you're unsure, check with your council.
Yes. On a flat roof, panels can sit on ballast trays weighted with concrete blocks. Whether this suits your roof depends on its structure.
Yes. We install home EV chargers, including Zappi, and we supply and fit batteries, mainly Fox and Sigenergy. How a battery connects depends on your inverter, so tell us what you have.
07 / Get in touch
Get a free,
Get a free,
no-obligation quote.
Tell us about your roof and what you have in mind, and we'll come back with honest advice and a clear quote.